Topic Options
#56343 - 09/30/18 04:56 PM PJL NOT WORKING on RICOH 8220s Printer
Anwar Hussain Offline
OL Toddler

Registered: 12/02/17
Posts: 37
Loc: OH
Guys, Any idea why the below PJL is not working on RICOH 8220s Printer ? Please help.


========================================
%%-12345X@PJL COMMENT
@PJL JOB NAME=" LOAD MYLAR PAPER MODIFY MEDIA"
@PJL SET RESOLUTION=600
@PJL COMMENT %%%%StartKPDComments
@PJL COMMENT %%HDi-JSE-1-1-Build: 05.0001.b10
@PJL COMMENT %%KDKChargeNumber: (999)
@PJL COMMENT %%KDKBody: (Mylar) on
@PJL COMMENT %%KDKPrintMethod: print
@PJL COMMENT %%KDKOutputMedia: stapler
@PJL COMMENT %%Requirements: numcopies(1) staple(none) fold(none) simplex noncollate jog(none)
@PJL COMMENT %%KDKRequirements: numcopies(1) staple(none) fold(none) simplex collate jog(alternate) jog(none) trim(off)
@PJL COMMENT %%KDKCovers: (Letter) none
@PJL COMMENT %%KDKRotation: 0
@PJL COMMENT %%KDKError: onerror (Letter)
@PJL COMMENT %%KDKActOn:
@PJL COMMENT %%%%OperatorMessage:
@PJL COMMENT %%%%Title: (MODIFY Using Job Detailss)
@PJL COMMENT %%%%For: (MYLAR JOB)
@PJL COMMENT %%%%Emulation: pcl5
@PJL COMMENT %%%%Routing: (Mylar labels)
@PJL COMMENT %%%%DocumentPrinterRequired: () (DS9110)
@PJL COMMENT %%%%DocumentMedia: (Mylar) 612 792 160 (white) (mylar)
@PJL COMMENT %%%%+ (Mylar) 612 792 160 (white) (mylar)
@PJL COMMENT% %KDKMedia: (Mylar)
@PJL COMMENT%%%%+ (Mylar)
@PJL COMMENT %%%%KDKEngineImageAlign: Left Top 0.00 0.00
@PJL COMMENT %%KDKEngineImageAlign: 10.00 -15.00 0.00 0.00
@PJL COMMENT %%KDKEngineGRET: off
@PJL COMMENT %%KDKSpool:
@PJL COMMENT %%KDKReqPunch: 0
@PJL COMMENT %%%%EndKPDComments
@PJL COMMENT %%%%EndComments

========================================

Thanks

Anwar Hussain

Top
#56344 - 09/30/18 04:57 PM Re: PJL NOT WORKING on RICOH 8220s Printer [Re: Anwar Hussain]
Anwar Hussain Offline
OL Toddler

Registered: 12/02/17
Posts: 37
Loc: OH
Please note that is was used for alignment on KODAK.

Top
#56348 - 10/01/18 08:43 AM Re: PJL NOT WORKING on RICOH 8220s Printer [Re: Anwar Hussain]
Jean-Cédric Offline
OL Expert

Registered: 10/03/16
Posts: 482
Loc: Québec, Canada
Print through the Ricoh printer driver and have it execute as you expect (duplexing, tray switch, subset stapling, etc...). Once it works, redo the same print but to a file. Look at the beginning of the file, you will see the PJL commands used by the Ricoh printer.

That will give you a head start at what the Ricoh printer requires.

Top
#56355 - 10/07/18 12:17 AM Re: PJL NOT WORKING on RICOH 8220s Printer [Re: Anwar Hussain]
Anwar Hussain Offline
OL Toddler

Registered: 12/02/17
Posts: 37
Loc: OH
Thank You Jean

Top